Class 100 Clean Room Data Recovery Lab is very important when it comes to data recovery from Physical damage or Media level damaged cases. Because hard disk’s are manufactured in Class 100 Clean Room Lab Environment with the help of Robotics and precision is maintained with read and write heads and magnetic platters. The components inside the hard drive are so delicate & the distance between head & platter is so near that its about 1/1000 of human hair. Any particle accumulation on or in between platters will be catastrophic results in no data recovery, hence we use certified clean room lab for data recovery job.
Typically Clean Rooms are used in manufacturing or scientific research, production and development. That has a very low level of environmental pollutants such as dust, airborne microbes, aerosol particles and chemical vapors and human dead skin or bacteria.
Let us assume the situation without the clean room. If any company or individual operate physical or media level data recovery cases in the absence of a clean room lab, then there is no chance of getting any data back later. When you turn the hard drive “ON” and the dust particles are stuck between the platter and the heads, the effect is the same as using fine sandpaper, entire magnetic platter and hence data in it will be sanded off & there is no possibility to recover any data further. We do have technology for data recovery from damaged hard drives with fingerprints and dust particles, We use cleaning tools and materials for cleaning the platter damages and remove dust particles from lab work methods, but success ratio is not as of non damaged hard drives.
Our Data Recovery Engineers Working in Clean Room Lab
Clean room lab facility with antistatic ESD safe and Full body cover for to protect particle circulation inside our lab. Operator working on physically damaged case with gloves to avoid fingerprints and dead skin particles Job with Head and Platter related work for portable USB 3.0 Western Digital Hard Drive Damaged Heads after recovery work completion. Western Digital and Toshiba Hard Drives and Hitachi Hard Drives.
Class 100 Clean Room Lab
Physically damaged recovery job in our Lab
Media operation for Portable drive
Head assembly replaced for Seagate Hard Drives
Head assembly replaced for Other Hard Drives
Seagate 4 TB Hard drive in our Lab
Clean room lab facility with antistatic ESD safe and Full body cover for to protect particle circulation inside our lab.
Operator working on physically damaged case with gloves to avoid fingerprints and dead skin particles
Job with Head and Platter related work for portable USB 3.0 Western Digital Hard Drive
Damaged Heads after recovery work completion.
Western Digital and Toshiba Hard Drives and Hitachi Hard Drives.
Practically, if we take a look closely at a light fitting near a window you can see the dust in a normal or AC room. Even if we take care to clean the room daily we still find the dust and breathe particles in and out. Dust lands on everything and doesn’t stay in the air forever. Open a hard drive and leave it for approximately 2-5 minutes in a freshly cleaned room (not a clean room, I mean just a room that has been dusted and vacuumed). When you put back the components and pack the drive, you will find that, it already has dust particles on the platter and no DIY activity can remove the dust particles and fingerprints on the magnetic platter surfaces.
Class 100 Clean Room with ISO 5 Standards is required with not more than 0.5 microns of dust particles allowed inside & it needs to be maintained regularly with air flow, air pressure, temperature, humidity & moisture to work with media level cases. Any part of contamination inside the clean room lab will ruin data recovery job work. We own a clean room with class 100 clean room Standards & we maintain it regularly to perform data recovery from Corporate & Personal hard disks. The motor level replacement work and head level replacement work is completed in our clean room data recovery lab.
Cases that needs Clean Room Data Recovery Lab:
1) Clicking Noise inside hard disk. 2) Grinding Noise and whining in the disk. 3) Clucking Noise and then stops and clicks again. 4) Rattling Sound and Weird Noise. 5) Scratching media due to broken read and write heads. 6) Knocking Noise with continuous head clicks. 7) Beeping Noise in the drive. 8) Drilling Noise. 9) Slowly Clicks & Beeps. 10) Siren Noise inside hard disk.
Any above symptoms has to be operated by professionals and any tampering or DIY activity will lead to no results even from professionals. The above symptoms has to be handled in Clean room data recovery lab with special tools and equipment’s for highly sensitive Physical data recovery work on hard drives.